Most Durable
& Maintenance-Free Water Conditioner
No Salt or
Corrosive Chemicals Needed
You can finally treat hard water scale without the salt. (or
any other chemicals!) Perfect for places
where salt-based softeners are banned or undesired.
No Backwashing or Regeneration
No backwashing means no salty drained water, no
regeneration, and no drain to install. 100% environmentally friendly.
Scale Reduction and Prevention
Prolongs the lifespan of pipes and home appliances from
clogging with calcium carbonate. Also reduces the existing scale that's already
in your house. Much easier clean ups of hard water spotting on cars, windows,
and dishes.
Cost efficient
Save $100-$200 per year just on salt refill costs when
compared to traditional softeners. No electricity required means no extra
energy expenses. Plus, you can save energy expenses due to the increased
efficiency of your hot water heater.
Simple Installation
Compact single tank system, fits anywhere with ease. Simply
connect to the main supply line of your house. Pipe in, pipe out. No
time-consuming programmable controls to set and understand.
Little Maintenance
Virtually no maintenance.
This is a truly trouble-free "set it and forget" type of
system. Pre-filter needs to be changed every 6 to 9 months
Known Health Benefits
Traditional ion exchange softeners produce salty water which
contain high sodium content. Eliminating sodium intake can reduce health risks
and improve your cardiovascular system.
Worry free
Under proper installation, we estimate the Filtersorb SP3
media will last a minimum of 5 to 8 years.
Specifications
Operating Temperature
|
5 – 70 C, 41 – 158 F
|
Ph Range
|
6.5 – 8.5
|
Ferrous Iron, MAX
|
0.3 mg/L
|
Manganese, MAX
|
0.05 mg/L
|
Copper, MAX
|
1.3 mg/L
|
Water Pressure (psi)
|
15 psi min, 100 psi max
|
Chlorine
|
< 3 ppm Hydrogen Peroxide (H2O2) <0.5 ppm
|
Grains of Hardness
|
>25 gpg, call for technical support
|
Hydrogen Sulfide (H2S)
|
Must be removed prior to SP3 tank
|
Polyphosphates
|
Must be removed prior to SP3 tank
|
Oil
|
Must be removed prior to SP3 tank
|
Maximum Service Flow (gpm)*
|
12
|
Filtersorb SP3 Media (Liters)
|
4
|
Overall System Height
|
53-3/8"
|
Overall System Depth
|
14-5/8"
|
Overall System Width
|
9-3/8"
|
Included in the system - Filtersorb SP Filter Media, Enpress
Mineral tank featuring the Vortech bottom distribution plate, C-Series in/out
head, C-Series Bypass, 1" NPT PVC - plumbing adapters, 1" x 10"
"Big Blue" housing with GAC prefilter with mounting bracket
* Service flow rate with a maximum hardness of 25 grains per
gallon.