Aquatec LPS340G Low Pressure Switch
Low
Pressure Switch (LPS) installs on the inlet side of the booster pump
and will shut-off the pump if the feed water is interrupted. Switch
remains closed at 5 PSI or more, when pressure drops below 5 PSI, Switch
will open and cut-off the power to the pump. Requires wire harness #
21-028 (sold separately).
For
Delivery Pump (Demand Pump) applications involving a pressurized
bladder tank (ie RO Tank), a Low Pressure Switch is recommended to
shut-off the Delivery Pump in the event the RO tank runs empty, thus
preventing damage to the bladder and the tank from cavitating. When
Delivery Pumps are used to pull water from an RO Bladder tank, the tank
pre-charge is typically reduced to 1 psi to increase water storage
volume.
Specifications:
Material: Wetted parts are FDA Approved or NSF listed
Connection: 1/8" Male NPT thread
Pressure Switch Closed: @ 5 PSI or more
Pressure Switch Opened: 1 - 5, Preset @ 2.3 PSI
Electrical: 125 - 250 VAC, 15A Max.
Power: Compatible with 110V or 220V transformers
Sustained Operating Pressure: 50 PSI Max.
Top Terminal: Common Lead
Middle Terminal: Normally Open Lead
Bottom Terminal: Normally Closed Lead
Accessories: Wire Harness # 21-028 to connect to pump and transformer
