AUTO FLUSH FLOW RESTRICTORS (AFR SERIES)
AUTOMATIC FLUSH TIMERS (AFT SERIES)
Aquatec’s
AFT and AFR Series are engineered to maximize system efficiency and
prolong membrane life. These components utilize a normally closed
solenoid valve which automatically “power flushes” the membrane upon
start-up and then subsequently for 15-20 seconds every hour.This
turbulent water action removes organic and inorganic contaminants from
the membrane surface. Any standing, idle water in the membrane module is
automatically purged to the drain. Virtually all system manufacturers
recommend that their membranes be flushed regularly to insure proper
performance and extended membrane life. The AFT and AFR Series perform
this process seamlessly and automatically. The AFT and AFR Series also
include a modular connector for plug-and-play integration with Aquatec’s
other system components.
• Improves TDS rejection rate
• Extends membrane life
• Available with integrated flow restrictor
•Hermetically sealed circuitry
TECHNICAL SPECIFICATIONS:
WETTED MATERIALS: Polypropylene, EPDM, Stainless Steel
POWER REQUIREMENTS: 24 VAC/24 VDC, 120 mA - flushing, 40mA – off cycle
INLET PRESSURE/ORIFICE: Maximum 100 psi, .093” diameter orifice
FLOW RESTRICTOR ORIFICES: 300mL – 700mL orifices available
STANDARD FITTINGS: John Guest 1/4” built-in ports, Jaco 1/4” black inlet, 1/4” white outlet
OPTIONAL FITTINGS: John Guest 3/8” grey
ELECTRICAL CONNECTION: AMP Mate-N-Lok
